V3 Dry Glove Ring System

Dry Glove Ring System from Northern Diver

Our innovative Dry Glove Ring System is trusted by recreational, technical and commercial divers around the world in an incredibly diverse range of diving conditions, including contaminated water environments.

The system has been designed for use with neoprene or membrane drysuits that have either latex or neoprene wrist seals. It’ll fit almost any suit at almost any stock size. There should never be a fitting issue with a drysuit with latex seals as they’re set stock sizes; for fitting on a suit with neoprene seals, if you’re concerned, we’d advise you to consult us about it first. The fitting of the Dry Glove Ring System doesn’t impact the integrity of the drysuit seal in any way. The best part of the system is that it essentially adds another seal and with this inner and outer gloves, you’re wearing an additional set of gloves for your dive. This will help you stay warm when diving in cooler climates for longer.

Once fitted to the drysuit, the twin-safe locking ring mechanism gives simple, secure glove engagement. Releasing the gloves when required is equally as straightforward. One of the main benefits of the Dry Glove Ring System is that you can take the ring system on and off as required making it incredibly versatile, it doesn’t affect the form, function or fit of your suit in any way.

What’s in the box of a Dry Glove System?

Included in the Dry Glove System package are the pair of Ansell Extra™ gloves, thermal fleece inner gloves, two dry glove modules, three sealing rings, a locking tool and an adhesive sealant*.

What size of Dry Glove should I order?

Please order the usual size of glove you wear. We’ve sized up the outer glove when we’ve made them to compensate for the wearing of the inner glove. So if you use a large glove normally, you should order a large in the Dry Glove system, it’ll fit perfectly over the usual large inner glove.

Can I fit the Northern Diver Dry Glove Ring System myself?

You can yes, however as with any alteration or repair, we’d always suggest you should have them fitted by a qualified repair technician.

An instructional video for fitting is available on our YouTube channel. You can also access this video via the link on the left hand side of this page.

We offer a fitting service for an additional fee. Please contact us to enquire.

A closer look at the system’s key components…

Ansell Extra™ glove

• 100% natural rubber with no filters
• Extremely high resistance to many ketones, salts, detergents, alcohols, alkalis and fats
• Excellent resistance to mechanical hazards
• 100% cotton sock lining makes for a softer, more comfortable glove that helps absorb perspiration
• Chlorinated for better grip and increased chemical resistance

Thermal fleece inner glove

• Thermal 4-way stretch fleece
• Flatlock stitched seams for comfort
• Snug fit around wrist area for additional thermal protection
• Removable for warmer waters, or for use post-dive
• Machine washable

Dry glove ring modules

The robust housing that brings the system together.

These modules lock the system in place and are equally used to disengage the system by means of the twin-safe rotating ring and button mechanism.

Sealing rings

• Red: This large ring is used for thinner drysuit wrist seals such as latex
• Grey: This ring is used for thicker drysuit wrist seals such as neoprene
• Blue: This intermediate ring can be used in place of the red or grey ring to fine tune the fit

Gloves conform to the requirements of European Directive 89/686/EEC and to the European standards EN420:2003 + A1:2009, EN374:2003 and EN388:2003.

* PLEASE NOTE THAT DUE TO SHIPPING REGULATIONS, ORDERS FROM OUTSIDE UK WILL NOT CONTAIN ADHESIVE SEALANT